6 docs tagged with "ppp"

This page demonstrates configuring IPv6 Prefix Delegation over PPPoE in RouterOS, showing how to set up DHCPv6-PD pools on servers and clients, including interface configuration and verification of dynamic prefix delegation.

This page documents MikroTik RouterOS L2TP configuration, covering client and server setup with properties like authentication methods, MTU/MRRU settings, IPsec integration, and dynamic interface management for Layer Two Tunneling Protocol scenarios.

This page explains how to configure a MikroTik RouterOS device as an L2TP Network Server (LNS) to establish VPDN connections with a Cisco router acting as an LAC. It includes basic configuration examples for PPPoE client setup on the LAC, L2TP server activation on the LNS, and sample routerOS commands for both roles.

MLPPP enhances PPP links by splitting and recombining data across multiple logical or physical links, increasing bandwidth without upgrading hardware. It supports both single-link (using MRRU) and multi-link configurations, with examples provided for PPPoE server/client setups.

PPP in RouterOS enables point-to-point protocol communication for transporting multi-protocol datagrams, featuring LCP and NCP components. It supports PPP client and server configurations with examples like dial-on-demand settings and firmware upgrades for compatible modems.

MikroTik RouterOS PPP AAA functionality provides authentication, authorization, and accounting with local and RADIUS support. PPP profiles define default settings for user access records, including bridge configurations, rate limiting, and security options like encryption and compression.