This page provides an overview of basic VLAN switching configuration on MikroTik RouterOS, covering setup for devices with Marvell Prestera and RTL8367/CRS series switch chips, including hardware-offloaded VLAN filtering and port configuration examples.
---
This page presents practical case studies for RouterOS bridging and switching, covering VLAN configurations, IGMP/MLD snooping, spanning tree protocols, loop prevention, and switch-chip behavior to aid Layer 2 deployment and troubleshooting.
This page explains configuring CAPsMAN with VLANs in MikroTik RouterOS, enabling centralized wireless management and VLAN tagging for different client groups. It covers Local Forwarding Mode setup, provisioning rules, DHCP configuration, and VLAN filtering on switches.
Ethernet over IP (EoIP) Tunneling in MikroTik RouterOS creates secure Layer 2 bridges over IP networks using GRE encapsulation, supporting flexible topologies like LAN extension and encrypted connections with IPsec.
This page provides a step-by-step CLI guide for configuring automatic failover between 60Ghz and 5Ghz wireless links using MikroTik RouterOS, including bridge setup, interface bonding, and W60G device connection instructions.
This page provides a step-by-step CLI example for configuring automatic failover between 60Ghz and 5Ghz wireless links using bonding, including bridge setup and W60G interface configuration for both bridge and station modes.
Interface Lists in RouterOS allow defining sets of interfaces for simplified management across various configurations. The main menu lists predefined and custom interface lists, while the member sub-menu handles statically configured members. Dynamic interfaces are automatically included or excluded based on flags, and bridges require careful handling to avoid unintended behavior.
This page addresses Layer2 misconfigurations in MikroTik RouterOS, focusing on issues like improper bridge setups with hardware offloading and port isolation. It explains symptoms such as low throughput, high CPU usage, and incorrect hardware offloading flags, along with solutions for devices that lack port isolation support.
This page provides a step-by-step CLI example for configuring a transparent wireless bridge between two MikroTik W60G devices, including connecting via MAC-Telnet, setting up a bridge with interface members, and establishing wireless connectivity in bridge mode.
This guide demonstrates configuring a transparent wireless bridge between two MikroTik W60G devices using WinBox, covering interface setup, bridge creation, wireless mode configuration for both bridge and station roles, and additional security recommendations.