Skip to main content
Version: 7.26

hardware


system/resource/hardware​

Conditions: !powerpc, !smips
Type: Directory
Detected hardware devices connected over PCI, USB or SCSI buses. Empty on boards with no such bus (for example the hAP ax²).

FlagNameDescription
Iinactiveinactive: the device is present but not active
Read-only ArgumentTypeDescription
device-namestringName of the device as reported by its firmware (name column refinement)
locationstringDevice location in the system topology
parentenumParent bus or controller
typeenum (usb | pci | scsi | serial)Bus type of the device: usb, pci, scsi or serial
vendorstringDevice vendor name
namestringDevice name or model
categorystringDevice category
serial-numberstringDevice serial number
vendor-idstringVendor identifier (VID)
device-idstringDevice identifier (PID / Device ID)
speedstringNegotiated device speed
portsnumNumber of ports provided by the device
usb-versionstringSupported USB version
manufacturer-reported-max-powerstringMaximum power draw reported by the device (for example a USB modem)
overcurrent (syscap=usb-hub)num
irqnumAssigned interrupt number
memorymulti { range: composite { min: num , max: num } }Memory window assigned to the device
iomulti { range: composite { min: num , max: num } }I/O window assigned to the device
ownerstringSubsystem or driver owning the device
device-pathmulti { path: string }Device path from root bus to endpoint