# monitor-peers > Continuously prints the client's view of its time sources, updating in place. Includes the local reference clock (127.127.1.0) when use-local-clock is enabled. See the NTP guide. ----------- ## system/ntp/monitor-peers **Type:** Command Continuously prints the client's view of its time sources, updating in place. Includes the local reference clock (127.127.1.0) when `use-local-clock` is enabled. See the [NTP](../../../system-information-and-utilities/ntp) guide. Association type, for example `ucast-client` for a unicast server. Peer address from the server list, or 127.127.1.0 for the local reference clock. Reference ID: the time source of the peer (typically the address of the peer's own upstream source). Empty while the peer is unsynchronized. Stratum announced by the peer. 16 means unsynchronized. Current poll interval to this peer, as the power of 2 in seconds (6 = 64 s). Poll interval the peer asks for, as the power of 2 in seconds. Total round-trip delay from the peer to the root (stratum 1) time source. Maximum error of the peer relative to the root time source. Estimated clock offset of the peer relative to the local clock. Round-trip delay to the peer. Dispersion of the peer: the accumulated measurement error of its time. Variation of the offset between consecutive samples.