monitor
interface/wireless/monitor
Package: wireless-rep
Type: Command
| Read-only Argument | Type | Description |
|---|---|---|
| status | enum (disabled | searching-for-network | connected-to-ess | initializing | searching-for-frequency | radar-detecting | running-ap | tkip-countermeasures | nstreme-dual-slave) { disabled:0, searching-for-network:1, connected-to-ess:2, initializing:3, searching-for-frequency:100, radar-detecting:101, running-ap:102, tkip-countermeasures:103, nstreme-dual-slave:200 } | |
| status-reason | string | |
| channel | string | |
| wireless-protocol | enum (802.11 | nstreme | nv2) { 802.11:1, nstreme:2, nv2:3 } | |
| nstreme-status | enum (ok | degraded) | |
| tx-rate | string | |
| rx-rate | string | |
| ssid | string | |
| bssid | macAddr | |
| radio-name | string | |
| signal-strength | num | |
| signal-strength-ch0 | num | |
| signal-strength-ch1 | num | |
| signal-strength-ch2 | num | |
| signal-strength-ch3 | num | |
| tx-signal-strength | num | |
| tx-signal-strength-ch0 | num | |
| tx-signal-strength-ch1 | num | |
| tx-signal-strength-ch2 | num | |
| tx-signal-strength-ch3 | num | |
| noise-floor | num | |
| signal-to-noise | num | |
| tx-ccq | num | |
| rx-ccq | num | |
| p-throughput | num | |
| overall-tx-ccq | num | |
| registered-clients | num | |
| authenticated-clients | num | |
| current-ack-timeout | num | |
| current-distance | num | |
| wds-link | bool | |
| bridge | bool | |
| nstreme | bool | |
| polling | bool | |
| csma-disabled | bool | |
| framing-mode | enum (none | best-fit | exact-size) { none:0, best-fit:2, exact-size:3 } | |
| framing-limit | num | |
| framing-current-size | num | |
| routeros-version | string | |
| last-ip | ipAddr | |
| 802.1x-port-enabled | bool | |
| authentication-type | enum (wpa-psk | wpa2-psk | wpa-eap | wpa2-eap) { wpa-psk:0, wpa2-psk:1, wpa-eap:2, wpa2-eap:3 } | |
| encryption | enum () | |
| group-encryption | enum () | |
| management-protection | bool | |
| compression | bool | |
| wmm-enabled | bool | |
| nv2-sync-state | enum (searching | syncing | synced) { searching:0, syncing:1, synced:2 } | |
| nv2-sync-master | macAddr | |
| nv2-sync-distance | num | |
| nv2-sync-period-size | num | |
| nv2-sync-downlink-ratio | num | |
| current-tx-powers | multi { current-tx-power: super { rate: enum () , [tx-power] :num , [tx-power-real] (num , tx-power-total: num } } | |
| current-ofdm-errors | num | |
| current-cck-errors | num | |
| 1s-frames | composite { compressed: num , total: num } | |
| 1s-compressed-frames | num | |
| 1s-bytes | composite { compressed: num , total: num } | |
| 1s-length-of-orig | num | |
| total-frames | composite { compressed: num , total: num } | |
| total-compressed-frames | num | |
| total-bytes | composite { compressed: num , total: num } | |
| total-length-of-orig | num | |
| notify-external-fdb | bool | |
| cloned-mac-address | macAddr | |
| searching-for-address-to-clone | bool |