w60g

---

interface/w60g

Syscap: 60ghz
Package: wireless-rep
Type: Directory

Flag	Name	Description
X	disabled
R	running

Argument	Type	Description
name	string
mtu	num
l2mtu	num
mac-address	macAddr
arp	enum (disabled | enabled | proxy-arp | reply-only | local-proxy-arp)
arp-timeout	alt { enum (auto) { auto:0 } , time }
region	enum (no-region-set | usa | canada | asia | eu | japan | australia | china)
mode	enum (ap-bridge | station-bridge | sniff | bridge | debug | terragraph)
ssid	string
frequency	enum (auto | 58320 | 60480 | 62640 | 64800 | 66000 | 66960 | 69120)
scan-list	multi { array-id, enum (58320 | 60480 | 62640 | 64800 | 66000 | 66960 | 69120) { 58320:58320, 60480:60480, 62640:62640, 64800:64800, 66000:66000, 66960:66960, 69120:69120 } }
password	string
tx-sector	num
put-stations-in-bridge	iface_enum { none:0 }
isolate-stations	bool
mdmg-fix	bool

Read-only Argument	Type	Description
default-name	string
default-scan-list	multi { array-id, enum (58320 | 60480 | 62640 | 64800 | 66000 | 66960 | 69120) { 58320:58320, 60480:60480, 62640:62640, 64800:64800, 66000:66000, 66960:66960, 69120:69120 } }
beamforming-event	num
tx-io-msdu	num
tx-sw-msdu	num
tx-fw-msdu	num
tx-ppdu	num
tx-ppdu-from-q	num
tx-mpdu-new	num
tx-mpdu-total	num
tx-mpdu-retry	num
rx-ppdu	num
rx-mpdu-crc-err	num
rx-mpdu-crc-ok	num

interface/w60g/align

Package: wireless-rep
Type: Command

Read-only Argument	Type	Description
connected	bool
frequency	num
remote-address	multi { array-id, macAddr }
tx-mcs	multi { array-id, num }
tx-phy-rate	multi { array-id, num }
signal	multi { array-id, num }
rssi	multi { array-id, num }
10s-average-rssi	multi { array-id, num }
tx-sector	multi { array-id, num }
tx-sector-info	multi { array-id, string }
distance	multi { array-id, num }
baseband-temperature	num
rf-temperature	multi { array-id, num }
tx-packet-error-rate	num

interface/w60g/monitor

Package: wireless-rep
Type: Command

Read-only Argument	Type	Description
connected	bool
frequency	num
remote-address	multi { array-id, macAddr }
tx-mcs	multi { array-id, num }
tx-phy-rate	multi { array-id, num }
signal	multi { array-id, num }
rssi	multi { array-id, num }
tx-sector	multi { array-id, num }
tx-sector-info	multi { array-id, string }
distance	multi { array-id, num }
baseband-temperature	num
rf-temperature	multi { array-id, num }
tx-packet-error-rate	num

interface/w60g/reset-configuration

Package: wireless-rep
Type: Command

interface/w60g/scan

Package: wireless-rep
Type: Command

Flag	Name	Description
R	routeros

Read-only Argument	Type	Description
address	macAddr
ssid	string
frequency	string
signal	num
rssi	num

interface/w60g/station

Package: wireless-rep
Type: Directory

Flag	Name	Description
X	disabled
R	running

Argument	Type	Description
name	string
parent	iface_enum
remote-address	macAddr
mtu	num
mac-address	macAddr
arp	enum (disabled | enabled | proxy-arp | reply-only | local-proxy-arp)
arp-timeout	alt { enum (auto) { auto:0 } , time }
put-in-bridge	iface_enum { none:0, parent:0xffffffff }

Read-only Argument	Type	Description
default-name	string
beamforming-event	num

interface/w60g/station/monitor

Package: wireless-rep
Type: Command

Read-only Argument	Type	Description
connected	bool
remote	macAddr
tx-mode	enum (dmg | edmg-cb1 | edmg-cb2 | edmg-cb1-long-ldpc | edmg-cb2-long-ldpc)
tx-mcs	num
tx-phy-rate	num
signal	num
rssi	num
tx-sector	num
tx-sector-info	string
distance	num