Skip to main content
Version: current

IPv6 PD over PPP

This example demonstrates how to set up PPPoE server and client to use IPv6 Prefix Delegation.

IPv6 Prefixes can be delegated over PPP interfaces. When a client connects, PPP will automatically add a dynamic DHCPv6-PD server. This allows running a DHCPv6 client on PPP interfaces.

Configuration

Server

The dhcpv6-pd-pool parameter under PPP Profiles is used to enable PPP-PD. PPP will use the specified IPv6 pool to create a dynamic DHCP server.

So the first step is to add an IPv6 pool:

/ipv6/pool
add name=myPool prefix=2001:db8:7501:ff00::/60 prefix-length=62

Now we can configure a PPP profile and add a PPPoE server

/ppp/profile/set default dhcpv6-pd-pool=myPool

/interface/pppoe-server/server
add service-name=test interface=ether1

Client

On the client side we need to set up PPPoE client interface and run DHCP client on it.

/interface/pppoe-client
add name=client-test interface=ether1 user=a1 service-name=test

/ipv6/dhcp-client
add interface=client-test pool-name=ppp-test pool-prefix-length=64

Testing status

On the server side check if a dynamic DHCP server is added and prefix is bound to a specific client:

[admin@RB1100] /ipv6/dhcp-server> print
Flags: D - dynamic, X - disabled, I - invalid
# NAME INTERFACE ADDRESS-POOL LEASE-TIME
0 D <pppoe-a1> <pppoe-a1> myPool 3d

[admin@RB1100] /ipv6/dhcp-server/binding> print
Flags: X - disabled, D - dynamic
# ADDRESS DU IAID SER.. STATUS
1 D 2001:db8:7501:ff04::/62 247 <pp.. bound

On the client side, check if DHCP client is bound and pool is added:

[admin@x86-test] /ipv6/dhcp-client> print
Flags: D - dynamic, X - disabled, I - invalid
# INTERFACE STATUS PREFIX EXPIRES-AFTER
0 client-test bound 2001:db8:7501:ff04::/62 2d23h18m17s

[admin@x86-test] /ipv6/pool> print
Flags: D - dynamic
# NAME PREFIX PREFIX-LENGTH
0 D ppp-test 2001:db8:7501:ff04::/62 64