ipv6/neighbor
Type: Directory
List of all discovered nodes by the IPv6 Neighbor Discovery protocol, or nodes added manually by configuration.
The default maximum number of neighbor entries depends on installed RAM. Adjust it with /ipv6/settings/set max-neighbor-entries=x. See IPv6 Settings for details.
| Flag | Name | Description |
|---|
| X | disabled | disabled |
| D | dynamic | dynamic |
| R | router | router |
| Argument | Type | Description |
|---|
| address | ip6Addr | IPv6 address of the neighbor. |
| interface | interface_enum | Interface name to which this neighbor is attached. |
| mac-address | macAddr | MAC address of the device to add. |
| Read-only Argument | Type | Description |
|---|
| status | string | Status of the cached entry:
- noarp - the neighbor entry is valid. RouterOS does not validate this entry, but it can be removed when its lifetime expires.
- incomplete - address resolution is in progress and the neighbor's link-layer address is not yet determined.
- reachable - the neighbor was reachable recently (within tens of seconds).
- stale - the neighbor is no longer known to be reachable. Send traffic to the neighbor before attempting reachability verification.
- delay - the neighbor is no longer known to be reachable, and traffic has recently been sent to the neighbor. RouterOS delays probes briefly to allow the upper-layer protocol to confirm reachability.
- probe - the neighbor is no longer known to be reachable and unicast Neighbor Solicitation probes are being sent to verify reachability.
- failed - RouterOS could not resolve the neighbor's MAC address using the Neighbor Discovery protocol.
|
| vrf | enum | Indicates the VRF associated with this neighbor entry. |