Skip to main content
Version: 7.25

host


tool/sniffer/host​

Type: Directory

The addresses that took part in the traffic of the last capture, with their rates and byte counts. See Packet sniffer.

Read-only ArgumentTypeDescription
addressipAddrAddress seen in the captured packets.
ratecomposite { in: num , out: num }Rate of the address's captured traffic, in bits per second, as two values: in (to the address) and out (from the address). The rates are calculated when the capture stops; while the sniffer runs, they show 0.
peak-ratecomposite { in: num , out: num }Highest rate of the address's captured traffic during the capture, in bits per second (in/out), calculated when the capture stops.
totalcomposite { in: num , out: num }Captured bytes of the address's traffic: in (to the address) and out (from the address).