Skip to main content
Version: 7.24

advanced


interface/ethernet/switch/l3hw-settings/advanced​

Syscap: rbswitch and crs_prestera
Type: Settings Directory

ArgumentTypeDescription
route-queue-limit-high (syscap=!prestera-cpss)numDisable indexing if the number of routes in queue exceeds this value
route-queue-limit-low (syscap=!prestera-cpss)numRe-enable indexing if the number of routes in queue drops down to this value
shwp-reset-counternumReset the Shortest HW Prefix and try the full route table offloading after this amount of changes in the routing table
partial-offload-chunk (syscap=prestera-bc2)numMinimum number of routes for incremental adding in partial offloading
route-index-delay-min (syscap=!prestera-cpss)timeMinimum time between route processing and table indexing
route-index-delay-maxtimeMaximum time between route processing and table indexing
neigh-keepalive-interval (syscap=!prestera-cpss)timeThe interval between keeping alive hw-offloaded neighbors (hosts)
neigh-discovery-interval (syscap=!prestera-cpss)timeThe interval between sending ARP/ND requests to check availability of hw-offloaded neighbors
neigh-discovery-burst-limit (syscap=!prestera-cpss)numLimits the amount or ARP/ND requests that can be sent at once
neigh-discovery-burst-delay (syscap=!prestera-cpss)timeThe interval between ARP/ND request bursts
neigh-dump-retries (syscap=!prestera-cpss)numThe maximum retry count to offload a neighbor table in case of failure