Documentation updates - November 17, 2026
Summary of documentation changes made on November 17, 2026.
Firewall & QoS
- Connection tracking: Reworked the page around the tasks readers come with. It now covers how to read the connection list and its flags (
S,A,C,F,E,h,s,d,D), how to remove connections, the connection states with the usual state-based filter rules, TCP connections that start in the middle (loose-tcp-tracking), how long an entry stays and the settings (enabled=autostarts tracking when a filter, mangle or NAT rule exists, the per-state timeouts,max-entries), and the features that need connection tracking. The FastTrack section has the rule pair, the prerequisites, how to see the fast-tracked connections and the dummy rule counters, and what the fast path bypasses. A connection stops taking the fast path when the rule is removed, and Traffic Flow counts fast-tracked traffic, so it is not in the bypass list.
CLI Reference
- /ip/firewall/connection/tracking: All 23 settings and read-only values are described, with their defaults in the text:
enabledwith itsautomode (tracking starts when a filter, NAT or mangle rule needs it), every TCP state timeout,loose-tcp-trackingandliberal-tcp-tracking(out-of-window segments are accepted withyes), the UDP, ICMP and generic timeouts, andmax-entries, which follows the RAM. - /ip/firewall/connection and /ipv6/firewall/connection: All 39 fields of the connection list are described, including what each flag means, which direction
origandreplcount, the reply tuple after NAT, thetcp-statevalues, the ICMP and GRE fields, and theconnection-typenames.