Skip to main content

Documentation updates - November 13, 2026

Summary of documentation changes made on November 13, 2026.

Firewall & QoS​

  • Queues: Rewrote the queue documentation with tested examples: HTB, PCQ, burst, queue size and every queue type, plus the simple queue and queue tree CLI reference pages (target upload/download direction, priority, parent, packet marks).
  • CAKE: cake-memlimit on the CAKE queue type bounds its memory use. A CAKE queue can buffer more traffic in a simple queue than in an equivalent queue tree, so the queues index and the queue size page point at it.
  • RAW: Added the stateless warning for notracked traffic, the warning that filter rules must accept untracked packets, and filtered check outputs.
  • Layer7: Overhauled the page. Layer7 inspection matches a regular expression against the payload of IPv4 ICMP, TCP and UDP streams only — not IPv6 and not in RAW. The page covers the inspection window, the regexp syntax (hex escapes with a doubled backslash; no POSIX classes or octal escapes), RDP and Telnet examples, and the cost of the matcher.

High Availability Solutions​

  • VRRP: Overhauled the page and the configuration examples. All CLI rows are described, including group-authority (one interface controls the state of the group), vrid, priority and the ARP settings.

VPN​

  • PPTP: Overhauled the page and filled the client and server CLI reference: new client entries are disabled, max-mtu and max-mru are 1450 by default, and the server settings are described.
  • IPIP: Overhauled the page and the ipip and ipipv6 CLI reference. The firewall matches the outer packets as protocol=ipencap, mtu=auto subtracts 20 bytes for the outer IPv4 header, and keepalive uses the interval,retries format.

Bridging & Switching​

  • MACVLAN: Overhauled the page: when to use a MACVLAN instead of a VLAN, the parent requirements, VLAN precedence, private and bridge modes, MTU, and troubleshooting. All interface properties are described in the CLI reference.

Management Tools​

  • SSH: The known-hosts section covers the key format, one key per router address, and how to replace a key.

Hardware​

  • LtAP LTE12 ax: Updated the page for the LTE Category 12, dual-band Wi-Fi 6 access point with eSIM and GPS, including the specification and safety sections.